So there is an issue with the passenger seat belt warning on my 2013 Proceed, Its got a life of its own and goes off whither there is a passenger or not or if a belt if in use or not.. Is there a way to turn this function off completly?
Ros3
I very much doubt it!
Better to try and find why it is doing it, I'd suggest. First I'd check the connector under the seat, then perhaps try bouncing up and down on the seat a few times. Then check there is nothing in the seatbelt socket, perhaps spray a bit of contact cleaner into it. Maybe try turning the airbag isolator switch on and off a few times. After that, you'll probably need to seek help from someone who can analyse any fault codes.
Better to try and find why it is doing it, I'd suggest. First I'd check the connector under the seat, then perhaps try bouncing up and down on the seat a few times. Then check there is nothing in the seatbelt socket, perhaps spray a bit of contact cleaner into it. Maybe try turning the airbag isolator switch on and off a few times. After that, you'll probably need to seek help from someone who can analyse any fault codes.
There are various sequences that can be performed that should disable it, you'll just have to try and see.
How to Disable a Seat Belt Alarm: 2 Ways
The best ways to silence the dinging from a seat belt alarmWe'll tell you the best ways to disable your factory seat belt alarm fast when it won't turn off because of a malfunction, either through the vehicle itself or with a seat belt...
www.wikihow.com
otherwise use an alarm chime disabler if it comes back on again.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
