[boomer56]

Thank You for answer. Should check tomorrow.

Regards

 

[boomer56]

Reverse lights are now working. Found out that reverse light switch was bad. Link to picture.

Dropbox

www.dropbox.com

Regards

boomer56

 

[boomer56]

It took quite a bit of force to remove the switch 😠
Obviously the original light switch.
I had to use a 24 mm deep socket wrench to remove it.
The optional light switch requires a 22 mm deep socket wrench.

 

[boomer56]

Kia Sportage 2.0L L4 DOHC 16V 4WD / 5-Speed Manual. Model year 2007/2008

The reverse light switch can be found under the air cleaner housing.

Loosen the air cleaner hose clamp bolt with a 10 mm socket wrench or
some other suitable tool.
Open the clamps (clamp plates 4 pieces).
Remove the cover of air cleaner and air cleaner filter.
The air cleaner body (housing) is attached with two 6 mm metric bolts.
Remove bolts with a 10 mm socket wrench.
Lift away carefully air cleaner body.
Move the housing to the left towards the ignition coil.

Switch for reversing light lamp(s) is located on top of gear box.
You need a 24mm socket to remove the switch.

It took quite a bit of force to remove the switch.
Obviously the original light switch.

In my case an aftermarket reverse (back-up) light switch required a 22 mm deep wrench.

Link to picture: Reverse light switch

Regards