Joined
·
3 Posts
Hello all.
The better half has er dinged (unhelpfully more than in one location) the relatively new Niro (e-niro 3 2020) which led me to some googling and that led me to this forum, so hello!
The first location is the rear wheel arch and rear passenger door. There is a very slight indentation in the rear door and some scuffs on the rear wheel arch plastic trim.
So looking at the trim, it doesn't look like it would be too hard to switch over (assuming screws, then pulling it off maybe taping up the paintwork to avoid dings), but does anyone know if there is an online guide anywhere just to make sure I'm not missing something?
I'm also wondering if the slight ding in the rear passenger door could be pressed out - does anyone have a guide to see how easy it might be to pull off the door card and get to the inside of the metal exterior?
Thanks so much for any help!!
The better half has er dinged (unhelpfully more than in one location) the relatively new Niro (e-niro 3 2020) which led me to some googling and that led me to this forum, so hello!
The first location is the rear wheel arch and rear passenger door. There is a very slight indentation in the rear door and some scuffs on the rear wheel arch plastic trim.
So looking at the trim, it doesn't look like it would be too hard to switch over (assuming screws, then pulling it off maybe taping up the paintwork to avoid dings), but does anyone know if there is an online guide anywhere just to make sure I'm not missing something?
I'm also wondering if the slight ding in the rear passenger door could be pressed out - does anyone have a guide to see how easy it might be to pull off the door card and get to the inside of the metal exterior?
Thanks so much for any help!!
