PaulWolfkitch said:I have a Kia Sedona 2.9TD on a y plate my clutch pedal just fell to the floor leaving me unable to change gear, stopped the engine and lifted the pedal manualy and the car drove a mile or so before happening again there is no slip on the clutch when this happens so i am thinking hydralics
but after spending an hour searching for a resiviour i am stumped any tips on where it is and how to bleed it would be a great help i am hoping to do this my self and have moderate mechanical experiance
it sounds as though the seals on the slave cylinder have gone due to the sudden loss of pedal and the fact it worked for a short time after you pulled the pedal back up. The slave cylinder is located at the front of the engine where the gearbox and engine join. You maybe ale to buy just the seals but it may be you have to buy the entire cylinder, try your local pats place before going to Kia.