Kia Owners Club Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
morning folks,i have just bought a pair of osram night breaker headlight bulbs,
is there anything i need to know before i fit theses bulbs.
griff.
 

·
Registered
Joined
·
536 Posts
Don't touch them with bare skin, if you wear latex gloves make sure there powder free.
 

·
Registered
Joined
·
207 Posts
Do you know how to remove the headlamps to make changing the bulbs easier?2 x 10-mm bolts - one on top and one at the side, then ease the unit out, change bulbs and replace.
Otherwise you'll end up swearing!

Search this site for "changing headlamp bulbs" there were some photos posted some time ago.

Have fun in this cold weather!
 

·
Registered
Joined
·
476 Posts
Griffs Carens is a Mk2 Quiltman,differentway to change the bulbs!
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #5 ·
thanks for the answers can i search for topics, or will i have to check all the previous posts,
griff.

too cold at the moment quiltman i will leave the lights until the weekend.
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #6 ·
hi folks,the bulbs are now fitted, h4 headlight on my mk2, two 10mm bolts on the top of the light/plate
one lower down on the inside,push the headlight unit forwards away from the engine,
remove the plastic round cover by turning either way,
there is a spring clip to stop the bulb holder moving, the bulb holder shows you how to re-fit the bulb and the cover has top written in the plastic, so it should be easy putting it back together,
griff.
 
1 - 6 of 6 Posts
Top