Kia Owners Club Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
887 Posts
They are special bulbs for a start, make sure you have the right ones, look a little like a mini halogen, with a offset baynet cap.
To fit,. bit of a pain, remove the 10mm bolt you can see on the headlamp, now remove the plastic rivets from the plastic trim along the front where the bonnet slams, use a small philips screwdriver to gently push them in about 1/4" til the stop, now lever them out, remove the trim, and another bolt will be revealed, remove bolt and headlamp, swap bulb.
reset the plastic rivets before refitting by pushing the rod back out by around 1/4" it will become obvious when you try, they sort of click.
 
1 - 1 of 1 Posts
Top