Kia Owners Club Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Hi everyone, i had a bulb go on my carens last night, i changed it this morning but i can`t get the cap back on now thats behing the light fitting. Has anyone got any ideas on how i can get the cap back on. Its mainbeam and the gap is to small for the cap to fit through.
 

·
Registered
Joined
·
476 Posts
Did you undo the 2 x 10mm bolts & loosen the lamp unit? If not you need to do this, 1 bolt on the top & 1 on the side.
 

·
Registered
Joined
·
476 Posts
I'm amazed you managed to get the cap off & change the bulbs, bet you've got sore knuckles!

For next time: Undo the 2 x 10mm bolts, put a cloth on the bumper, undo the 2 electrical wiring connectors & ease the lamp unit out in1 whole piece then change the bulb before replacing.
 

·
Registered
Joined
·
476 Posts
In the most famous words of many: RTFM next time :)
 
1 - 8 of 8 Posts
Top