hi all, me again, is it me? or is the cam belt cover virtually impossible to get off!! ive tried all ways to get it over the pump sprocket but it just seems theres not enough room to clear. ive jacked the engine then let it down it will not clear, is there a magic way? its got me beat! help!!!
hi mate, ask viking paul! in a previous post he says the cover will come off without destroying it. when i did mine i had to saw through the cover with a hacksaw blade. you pull out the rubber bung near the injector pump and then saw down near the brass insert. you still have to take off the bottom pulley i believe and thats torqued up to about 450 ft pounds if i remember correctly. even after doing that it was still tight coming off and even tighter getting back on. ive sent you a pm